Remanufactured ink cartridges are much cheaper than HP ink cartridges, which is why a lot of people are going for them instead.
However, using remanufactured ink isn’t that easy. HP is working hard to protect its printers from it. It’s not a matter of protection as much as the company doesn’t want you to use other cartridges.
Since they sell ink cartridges, they typically want you to buy your ink from them. To do that, they’re putting limitations on the printer’s compatibility, but there are ways to get around that.
Can you use remanufactured ink cartridges in HP printers?
Follow this article to find out!
So, can You Use Remanufactured Ink Cartridges in Hp Printers?
Yes, you can use remanufactured ink cartridges in HP printers, but only if you disable the printer’s protection settings.
HP protects its printers to prevent you from using remanufactured ink cartridges. However, since new HP cartridges are quite costly, a lot of people resort to them instead.
If you want to do the same, follow the next steps.
How to Disable HP Cartridge Protection Setting in Your Printer
In order to use remanufactured cartridges in your HP printer, you’ll need to disable its protection settings.
If your printer has internet settings, disabling its protection settings will be a piece of cake. Here are the steps you need to do:
- Open your default web browser, and enter the HP printer’s IP address where the web address is. If you don’t know the IP address, you can find it in the printer’s settings, particularly in the network setup options.
- When you enter the IP address, the Embedded Web Server will open. When it does, click on Settings. You’ll find HP Cartridge Protection on the left side; click on it.
- You’ll then find the disabling option for HP Cartridge Protection. Click Disable, then Save.
Now, you should be able to use remanufactured ink in your HP printer without a hitch. If your printer doesn’t have internet settings, you can instead go to the printer settings. When you open the printer menu, you’ll find the Settings option.
Click on it, and disable the protection. You’ll find it under the name of HP Cartridge Protection or something along these lines. When you’re done, click Save.
Why You Shouldn’t Use Remanufactured Ink in Your HP Printer
Although you technically can use remanufactured ink in your HP printer, it’s recommended against for a lot of reasons. Here are some reasons why you shouldn’t use remanufactured or compatible ink with your printer.
Smart Chip Problems
Smart chips are essential in ink cartridges because they measure the amount of ink left inside. So, you won’t have to see your printouts looking smudgy to know that you need a new cartridge.
These chips also make sure the printer knows you’re using compatible ink, so it doesn’t shut down on you.
When the ink is remanufactured, the smart chips can fail. It may happen during the cleaning process, and they may simply be too old to work. In both cases, the cartridge will give you false measurements, and it may not work altogether.
Since remanufactured ink is much cheaper than original ink, it has low quality in comparison. HP performs quality tests to ensure its page yield numbers are accurate. Needless to say, low-quality cartridge manufacturers don’t do that.
As a result, the colors you’re printing won’t be as bold as you’d like, and the black will be hazy and closer to dark gray.
You can use remanufactured ink cartridges in HP printers, but it’s not the best thing to do. You’ll significantly reduce the quality of your printouts, and the cartridges won’t work as well as original ones.